VANAZ GAS PRESSURE REGULATOR R4110
Minimum Order Quantity: 1 Piece
|Regulator Type||High Pressure Regulator|
Supported ourselves with proficient amenities, we are readily instrumental in providing an inclusive variety of Vanaz Pressure Regulator R-4110 For Lpg/ng Used In Hotel Commercial / Industrial Imported Burners/fast Food Kfc/burger King/pizza Hut Etc Having Outlet Pressure 30-300 Mbar
- Alu Body Alu Bonnet
- Brass Trim Part
- Inlet Pressure 1-17 Kg/cm2
- Outlet Pressure 0.03-0.3 Kg/cm2 (30-300 Mbar )
- For Kfc ; Outlet Pressure Is 11" Wc (28-30 Mbar)
- Flow: 30 Nm3/hr Gas Lpg/ng
- Size: 1" Bsp Thread
Siemens QRB1 Photocell
|Ambient Light||< 5-50 LUX|
|Rated Current||6 A|
|Working Temperature||-20 to +60 deg C|
|Working Humidity||< 93% RH|
|Sensing Method||senses only yellow flame|
|Sensor Type||Photo resistor|
The QRB... are used primarily in connection with oil burner controls in intermittent operation.
- Photo resistive detectors for use with Siemens burner controls, for the supervision of oil flames in the visible light spectrum.
- The QRB... are used primarily in connection with oil burner controls in intermittent operation.
- General - Compact photo resistive flame detector with infused 2-wire thermoplastic cable. The detector is available with normal sensitivity, high sensitivity, or selected higher sensitivity, with or without flange and clamp or soft plastic plug (refer to «Type summary»).
- QRB1...A - Flame detector without soft plastic plug.
- This type of detector is fitted with the help of a flange.A guide groove in the securing flange and a cam on the detector clamp ensure vibration-free mounting and make certain that the photo resistive flame detector is always correctly sited towards the flame.
- QRB1...B - Flame detector with soft plastic plug.
- For mounting this type of detector on the burner, all that is required is a hole with a lateral groove (refer to «Dimensions»).The sealing and securing ribs of the soft plastic plug hold the detector firmly in the hole. The guide spring guarantees correct alignment of the photo resistive flame detector with the flame.
- QRB3... - The detector is supplied with a metal protective tube having an external diameter of 17 mm.This type of detector is always secured with a flange and a clamp